Real-Time Signal Analysis with Wider Dynamic Range and Enhanced Sensitivity in Multiplex Colorimetric Immunoassays Using Encoded Hydrogel Microparticles.

The simultaneous quantification of multiple proteins is crucial for accurate medical diagnostics. A promising technology, the multiplex colorimetric immunoassay using encoded hydrogel microparticles, has garnered attention, due to its simplicity and multiplex capabilities. However, it encounters challenges related to its dynamic range, as it relies solely on the colorimetric signal analysis of encoded hydrogel microparticles at the specific time point (i.e., end-point analysis). This necessitates the precise determination of the optimal time point for the termination of the colorimetric reaction. In this study, we introduce real-time signal analysis to quantify proteins by observing the continuous colorimetric signal change within the encoded hydrogel microparticles. Real-time signal analysis measures the "slope", the rate of the colorimetric signal generation, by focusing on the kinetics of the accumulation of colorimetric products instead of the colorimetric signal that appears at the end point. By developing a deep learning-based automatic analysis program that automatically reads the code of the graphically encoded hydrogel microparticles and obtains the slope by continuously tracking the colorimetric signal, we achieved high accuracy and high throughput analysis. This technology has secured a dynamic range more than twice as wide as that of the conventional end-point signal analysis, simultaneously achieving a sensitivity that is 4-10 times higher. Finally, as a demonstration of application, we performed multiplex colorimetric immunoassays using real-time signal analysis covering a wide concentration range of protein targets associated with pre-eclampsia.

α-Synuclein triggers cofilin pathology and dendritic spine impairment via a PrPC-CCR5 dependent pathway.

Cognitive dysfunction and dementia are critical symptoms of Lewy Body dementias (LBD). Specifically, alpha-synuclein (αSyn) accumulation in the hippocampus leading to synaptic dysfunction is linked to cognitive deficits in LBD. Here, we investigated the pathological impact of αSyn on hippocampal neurons. We report that either αSyn overexpression or αSyn pre-formed fibrils (PFFs) treatment triggers the formation of cofilin-actin rods, synapse disruptors, in cultured hippocampal neurons and in the hippocampus of synucleinopathy mouse models and of LBD patients. In vivo, cofilin pathology is present concomitantly with synaptic impairment and cognitive dysfunction. Rods generation prompted by αSyn involves the co-action of the cellular prion protein (PrPC) and the chemokine receptor 5 (CCR5). Importantly, we show that CCR5 inhibition, with a clinically relevant peptide antagonist, reverts dendritic spine impairment promoted by αSyn. Collectively, we detail the cellular and molecular mechanism through which αSyn disrupts hippocampal synaptic structure and we identify CCR5 as a novel therapeutic target to prevent synaptic impairment and cognitive dysfunction in LBD.

Efficacy and Safety of PrabotulinumtoxinA in Subjects With Benign Masseteric Hypertrophy: A Double-Blind, Randomized, Placebo-Controlled, Multicenter, Phase 3 Trial and Open-Label Extension Study.

BACKGROUND: Despite the widespread use of botulinum toxin (BTX) injection for the treatment of masseter muscle hypertrophy (MMH), there is no standard treatment option. OBJECTIVE: We report the efficacy and safety for BTX in MMH over a period of 48 weeks. METHODS: In double-blinded, placebo-controlled phase 3 trials, 180 patients (randomized 1:1) received treatment with placebo (normal saline) or prabotulinumtoxinA (48 units). Masseter muscle thickness (at maximal clenching and resting positions), 3D imaging analysis, and masseter muscle hypertrophy scale grades were analyzed at each time point. After the 24-week CORE study, all patients who met the same criteria of the CORE study at week 24 (n = 114) received only prabotulinumtoxinA, regardless of previous treatment, for an additional 24 weeks (48 weeks in total) for the open-label extension study. RESULTS: The largest differences in mean and percent changes from baseline in masseter muscle thickness were observed at 12 weeks, and there were significant differences between the 2 groups at all time points (all p < .001). The effect was independent of the number of injections. No serious adverse event was observed. CONCLUSION: PrabotulinumtoxinA could effectively ameliorate MMH without major complications.

Selected Area Manipulation of MoS2 via Focused Electron Beam-Induced Etching for Nanoscale Device Editing.

We demonstrate direct-write patterning of single and multilayer MoS2 via a focused electron beam-induced etching (FEBIE) process mediated with the XeF2 precursor. MoS2 etching is performed at various currents, areal doses, on different substrates, and characterized using scanning electron and atomic force microscopies as well as Raman and photoluminescence spectroscopies. Scanning transmission electron microscopy reveals a sub-40 nm etching resolution and the progression of point defects and lateral etching of the consequent unsaturated bonds. The results confirm that the electron beam-induced etching process is minimally invasive to the underlying material in comparison to ion beam techniques, which damage the subsurface material. Single-layer MoS2 field-effect transistors are fabricated, and device characteristics are compared for channels that are edited via the selected area etching process. The source-drain current at constant gate and source-drain voltage scale linearly with the edited channel width. Moreover, the mobility of the narrowest channel width decreases, suggesting that backscattered and secondary electrons collaterally affect the periphery of the removed area. Focused electron beam doses on single-layer transistors below the etching threshold were also explored as a means to modify/thin the channel layer. The FEBIE exposures showed demonstrative effects via the transistor transfer characteristics, photoluminescence spectroscopy, and Raman spectroscopy. While strategies to minimize backscattered and secondary electron interactions outside of the scanned regions require further investigation, here, we show that FEBIE is a viable approach for selective nanoscale editing of MoS2 devices.

Ultrahigh Photosensitivity Based on Single-Step Lay-on Integration of Freestanding Two-Dimensional Transition-Metal Dichalcogenide.

Two-dimensional transition-metal dichalcogenides have attracted significant attention because of their unique intrinsic properties, such as high transparency, good flexibility, atomically thin structure, and predictable electron transport. However, the current state of device performance in monolayer transition-metal dichalcogenide-based optoelectronics is far from commercialization, because of its substantial strain on the heterogeneous planar substrate and its robust metal deposition, which causes crystalline damage. In this study, we show that strain-relaxed and undamaged monolayer WSe2 can improve a device performance significantly. We propose here an original point-cell-type photodetector. The device consists in a monolayer of an absorbing TMD (i.e., WSe2) simply deposited on a structured electrode, i.e., core-shell silicon-gold nanopillars. The maximum photoresponsivity of the device is found to be 23.16 A/W, which is a significantly high value for monolayer WSe2-based photodetectors. Such point-cell photodetectors can resolve the critical issues of 2D materials, leading to tremendous improvements in device performance.

Application of augmented reality using automatic markerless registration for facial plastic and reconstructive surgery.

This study aimed to present a novel markerless augmented reality (AR) system using automatic registration based on machine-learning algorithms that visualize the facial region and provide an intraoperative guide for facial plastic and reconstructive surgeries. This study prospectively enrolled 20 patients scheduled for facial plastic and reconstructive surgeries. The AR system visualizes computed tomographic data in three-dimensional (3D) space by aligning with the point clouds captured by a 3D camera. Point cloud registration consists of two stages: the preliminary registration gives an initial estimate of the transformation using landmark detection, followed by the precise registration using Iterative Closest Point algorithms. Computed Tomography (CT) data can be visualized as two-dimensional slice images or 3D images by the AR system. The AR registration error was defined as the cloud-to-cloud distance between the surface data obtained from the CT and 3D camera. The error was calculated in each facial territory, including the upper, middle, and lower face, while patients were awake and orally intubated, respectively. The mean registration errors were 1.490 ± 0.384 mm and 1.948 ± 0.638 mm while patients were awake and orally intubated, respectively. There was a significant difference in the errors in the lower face between patients while they were awake (1.502 ± 0.480 mm) and orally intubated (2.325 ± 0.971 mm) when stratified by facial territories (p = 0.006). The markerless AR can accurately visualize the facial region with a mean overall registration error of 1-2 mm, with a slight increase in the lower face due to errors arising from tube intubation.

Are Surprise Questions and Probabilistic Questions by Nurses Useful in Home Palliative Care? A Prospective Study.

Background: Surprise questions (SQs) are used as screening tools in palliative care. Probabilistic questions (PQs) are more accurate than temporal predictions. However, no study has examined the usefulness of SQs and PQs assessed by nurses. Objectives: To examine the accuracy of nurses' SQ and PQ assessments in patients with advanced cancer receiving home palliative care. Design: A prospective single-center cohort study. Setting/Subjects: Adult patients with advanced cancer who received palliative care at home in South Korea between 2019 and 2020. Measurements: Palliative care specialized nurses were asked the SQ, "Would you be surprised if the patient died in a specific timeframe?" and PQ, "What is the probability that this patient will be alive (0 to 100%) within a specific timeframe?" at the 1-, 2-, 4-, and 6-week timeframes at enrollment. We calculated the sensitivities and specificities of the SQs and PQs. Results: 81 patients were recruited with 47 days of median survival. The sensitivity, specificity, and overall accuracy (OA) of the 1-week SQ were 50.0, 93.2, and 88.9%, respectively. The accuracies for the 1-week PQ were 12.5, 100.0, and 91.3%, respectively. The 6-week SQ showed sensitivity, specificity, and OA of 84.6, 42.9, and 62.9%, respectively; the accuracies for the 6-week PQ were 59.0, 66.7, and 63.0%, respectively.Conclusion: The SQ and PQ showed acceptable accuracy in home palliative care patients. Interestingly, PQ showed higher specificity than SQ at all timeframes. The SQ and PQ assessed by nurses may be useful in providing additional prognostic information for home palliative care.

Exosomes derived from human dermal fibroblasts (HDFn-Ex) alleviate DNCB-induced atopic dermatitis (AD) via PPARα.

Atopic dermatitis (AD) is a chronic inflammatory skin disease. Skin barrier dysfunction is the initial step in the development of AD. Recently, exosomes have been considered as potential cell-free medicine for skin defects such as aging, psoriasis and wounds. The aim of this study was to investigate the effects of human dermal fibroblast-neonatal-derived exosome (HDFn-Ex) on AD. HDFn-Ex increased the expression of peroxisome proliferator activated receptor α (PPARα) and alleviated the 1-chloro-2,4-dinitrobenzene (DNCB)-mediated downregulation of filaggrin, involucrin, loricrin, hyaluronic acid synthase 1 (HAS1) and HAS2 in human keratinocyte HaCaT cells. However, these effects were inhibited by the PPARα antagonist GW6471. In the artificial skin model, HDFn-Ex significantly inhibited DNCB-induced epidermal hyperplasia and the decrease in filaggrin and HAS1 levels via a PPARα. In the DNCB-induced AD-like mouse model, HDFn-Ex administration reduced epidermis thickening and mast cell infiltration into the dermis compared to DNCB treatment. Moreover, the decreases in PPARα, filaggrin and HAS1 expression, as well as the increases in IgE and IL4 levels induced by DNCB treatment were reversed by HDFn-Ex. These effects were blocked by pre-treatment with GW6471. Furthermore, HDFn-Ex exhibited an anti-inflammatory effect by inhibiting the DNCB-induced increases in IκBα phosphorylation and TNF-α expression. Collectively, HDFn-Ex exhibited a protective effect on AD. Notably, these effects were regulated by PPARα. Based on our results, we suggest that HDFn-Ex is a potential candidate for treating AD by recovering skin barrier dysfunction and exhibiting anti-inflammatory activity.

p-Phenylenediamine-Bridged Binder-Electrolyte-Unified Supramolecules for Versatile Lithium Secondary Batteries.

The binder is an essential component in determining the structural integrity and ionic conductivity of Li-ion battery electrodes. However, conventional binders are not sufficiently conductive and durable to be used with solid-state electrolytes. In this study, a novel system is proposed for a Li secondary battery that combines the electrolyte and binder into a unified structure, which is achieved by employing para-phenylenediamine (pPD) moiety to create supramolecular bridges between the parent binders. Due to a partial crosslinking effect and charge-transferring structure of pPD, the proposed strategy improves both the ionic conductivity and mechanical properties by a factor of 6.4 (achieving a conductivity of 3.73 × 10-4 S cm-1 for poly(ethylene oxide)-pPD) and 4.4 (reaching a mechanical strength of 151.4 kPa for poly(acrylic acid)-pPD) compared to those of conventional parent binders. As a result, when the supramolecules of pPD are used as a binder in a pouch cell with a lean electrolyte loading of 2 µL mAh-1 , a capacity retention of 80.2% is achieved even after 300 cycles. Furthermore, when it is utilized as a solid-state electrolyte, an average Coulombic efficiency of 99.7% and capacity retention of 98.7% are attained under operations at 50 °C without external pressure or a pre-aging process.

Ultrasensitive ImmunoMag-CRISPR Lateral Flow Assay for Point-of-Care Testing of Urinary Biomarkers.

Rapid, accurate, and noninvasive detection of biomarkers in saliva, urine, or nasal fluid is essential for the identification, early diagnosis, and monitoring of cancer, organ failure, transplant rejection, vascular diseases, autoimmune disorders, and infectious diseases. We report the development of an Immuno-CRISPR-based lateral flow assay (LFA) using antibody-DNA barcode complexes with magnetic enrichment of the target urinary biomarkers CXCL9 and CXCL10 for naked eye detection (ImmunoMag-CRISPR LFA). An intermediate approach involving a magnetic bead-based Immuno-CRISPR assay (ImmunoMag-CRISPR) resulted in a limit of detection (LOD) of 0.6 pg/mL for CXCL9. This value surpasses the detection limits achieved by previously reported assays. The highly sensitive detection method was then re-engineered into an LFA format with an LOD of 18 pg/mL for CXCL9, thereby enabling noninvasive early detection of acute kidney transplant rejection. The ImmunoMag-CRISPR LFA was tested on 42 clinical urine samples from kidney transplant recipients, and the assay could determine 11 positive and 31 negative urinary samples through a simple visual comparison of the test line and the control line of the LFA strip. The LFA system was then expanded to quantify the CXCL9 and CXCL10 levels in clinical urine samples from images. This approach has the potential to be extended to a wide range of point-of-care tests for highly sensitive biomarker detection.

How different are accuracies of clinicians' prediction of survival by assessment methods?

BACKGROUND: No standardized method has been established for evaluating the accuracy of a clinicians' prediction of survival (CPS). Till now, no study has compared the accuracy of CPS according to the evaluation methods using the same dataset. We aimed to examine the accuracy of CPS by different statistical approaches in patients with far-advanced cancer. METHODS: The current study was a secondary analysis of an international multicenter prospective cohort study. Newly admitted patients with advanced cancer were enrolled in palliative care units (PCUs) in Japan, Korea, and Taiwan. We obtained the temporal CPS at enrollment. The patients were classified into groups of days (≤7 days) and weeks (≤30 days) based on CPS and actual survival (AS). We evaluated the accuracy of CPS by the distribution, area under the receiver operating characteristics curve (AUROCs), and an estimate ±33% of AS. RESULTS: A total of 2,571 patients were assessed and admitted in 37 PCUs between January 2017 and September 2018. As for the "days" category, the distribution of AS is larger than that of CPS, however, the results are reversed in the "weeks" category. The AUROCs showed over 80% discrimination for both the "days" and "weeks" categories. Accurate CPS within ±33% of AS was approximately 30% in both "days" and "weeks" categories. CONCLUSIONS: We showed a discrepancy of approximately 30-80% in the accuracy of CPS among three different analysis methods: distribution, AUROC, and AS comparison. Considering the low accuracy of AS comparisons, clinicians should provide a wide range of survival time. CPS was able to effectively discriminate and may be useful for risk stratification.

Efficacy and safety of a novel 785 nm picosecond neodymium-doped yttrium aluminum garnet laser for the treatment of facial benign pigmented lesions in Asian skin: a pilot study.

BACKGROUND AND OBJECTIVES: Benign pigmented lesions and a general uneven tone in people with skin of color are growing issues that have been presented to dermatologists. To the best of our knowledge, this is the first controlled study to examine the efficacy and safety of using the newly introduced 785 nm neodymium-doped yttrium aluminum garnet (Nd:YAG) picosecond laser to treat facial benign pigmented lesions in Asian patients with diffractive lens array. MATERIALS AND METHODS: A 785 nm Nd:YAG picosecond laser was used to treat 15 healthy female volunteers older than 18 years who had Fitzpatrick skin types II-IV and facial benign pigmented lesions. Each volunteer received five weekly treatments in dual modes. The clinical improvement was assessed by independent investigators and by objectively measuring the melanin index. RESULTS: After the treatment, the melanin and erythema indices decreased, and the pigmented lesions showed clinical improvements. No serious adverse effects were observed during the study period. CONCLUSIONS: A 785 nm Nd:YAG picosecond laser may be safe and effective in treating facial benign pigmented lesions in Asian skin.

Salvage treatment of forearm arteriovenous fistula with small caliber inflow distal artery by percutaneous transluminal angioplasty.

BACKGROUND: Dysfunctional distal arteriovenous fistulas (AVFs) with small caliber distal inflow arteries theoretically require percutaneous transluminal angioplasty (PTA) throughout the entire arterial length. However, in clinical practice, whole distal inflow arterial PTA is not frequently performed due to concerns about possible arterial rupture. Therefore, we investigated the safety and efficacy of this procedure at our center, comparing it with the standard venous PTA. METHODS: From March 2017 to December 2022, 48 cases of distal AVF salvaged by whole distal inflow arterial PTA were assigned into a treatment group and 121 cases of distal AVF salvaged by venous standard PTA not involving the whole inflow artery were assigned into a control group. These two groups were then compared. RESULTS: Those in the treatment group (who received whole distal inflow arterial PTA) were older than those in the control group (mean age, 69 vs 59 years, p < 0.001). Otherwise, differences between the two groups were unremarkable. After the salvage treatment, primary patency seemed to decrease in the treatment group with whole distal inflow arterial PTA compared to the control group with conventional PTA, although such decrease was not significant (p = 0.072). However, primary assisted patency and secondary patency were comparable between the two groups (p = 0.350 and p = 0.590, respectively). And in the treatment group, only one arterial dissection occurred, which was successfully managed with balloon tamponade so that no distal AVF was abandoned due to complications following whole distal inflow arterial PTA. CONCLUSION: Whole distal inflow arterial PTA is an effective and safe option for distal AVF salvage with a narrowed inflow artery, frequently refractory to conventional venous PTA.

Comparison of Simplified Palliative Prognostic Index and Palliative Performance Scale in Patients with Advanced Cancer in a Home Palliative Care Setting.

Objective: The Palliative Performance Scale (PPS) has been reported to be as accurate as Palliative Prognostic Index (PPI). PPS is a component of the simplified PPI (sPPI). It is unknown whether PPS is as accurate as sPPI. This study aimed to compare the prognostic performance of the PPS and sPPI in patients with advanced cancer in a home palliative care setting in South Korea. Methods: This was a secondary analysis of a prospective cohort study that included Korean patients with advanced cancer who received home-based palliative care. We used the medical records maintained by specialized palliative care nurses. We computed the prognostic performance of PPS and sPPI using the area under the receiver operating characteristic curve (AUROC) and calibration plots for the 3- and 6-week survival. Results: A total of 80 patients were included, with a median overall survival of 47.0 days. The AUROCs of PPS were 0.71 and 0.69 at the 3- and 6-week survival predictions, respectively. The AUROCs of sPPI were 0.87 and 0.73 at the 3- and 6-week survival predictions, respectively. The calibration plot demonstrated satisfactory agreement across all score ranges for both the PPS and sPPI. Conclusions: This study showed that the sPPI assessed by nurses was more accurate than the PPS in a home palliative care setting in predicting the 3-week survival in patients with advanced cancer. The PPS can be used for a quick assessment.

High-speed mapping of surface charge dynamics using sparse scanning Kelvin probe force microscopy.

Unraveling local dynamic charge processes is vital for progress in diverse fields, from microelectronics to energy storage. This relies on the ability to map charge carrier motion across multiple length- and timescales and understanding how these processes interact with the inherent material heterogeneities. Towards addressing this challenge, we introduce high-speed sparse scanning Kelvin probe force microscopy, which combines sparse scanning and image reconstruction. This approach is shown to enable sub-second imaging (>3 frames per second) of nanoscale charge dynamics, representing several orders of magnitude improvement over traditional Kelvin probe force microscopy imaging rates. Bridging this improved spatiotemporal resolution with macroscale device measurements, we successfully visualize electrochemically mediated diffusion of mobile surface ions on a LaAlO3/SrTiO3 planar device. Such processes are known to impact band-alignment and charge-transfer dynamics at these heterointerfaces. Furthermore, we monitor the diffusion of oxygen vacancies at the single grain level in polycrystalline TiO2. Through temperature-dependent measurements, we identify a charge diffusion activation energy of 0.18 eV, in good agreement with previously reported values and confirmed by DFT calculations. Together, these findings highlight the effectiveness and versatility of our method in understanding ionic charge carrier motion in microelectronics or nanoscale material systems.

Facet-Dependent Passivation for Efficient Perovskite Solar Cells.

Understanding the interplay between the surface structure and the passivation materials and their effects associated with surface structure modification is of fundamental importance; however, it remains an unsolved problem in the perovskite passivation field. Here, we report a surface passivation principle for efficient perovskite solar cells via a facet-dependent passivation phenomenon. The passivation process selectively occurs on facets, which is observed with various post-treatment materials with different functionality, and the atomic arrangements of the facets determine the alignments of the passivation layers. The profound understanding of facet-dependent passivation leads to the finding of 2-amidinopyridine hydroiodide as the material for a uniform and effective passivation on both (100) and (111) facets. Consequently, we achieved perovskite solar cells with an efficiency of 25.10% and enhanced stability. The concept of facet-dependent passivation can provide an important clue on unidentified passivation principles for perovskite materials and a novel means to enhance the performance and stability of perovskite-based devices.

Long-pulsed 1,064-nm gallium arsenide laser surgical device treatment for improving symptoms of onychomycosis: a comparative analysis.

BACKGROUND: Onychomycosis is the most common infective nail disease, and treatment includes topical and systemic antifungal medications. Recently, laser therapy has emerged as a therapeutic option for patients who are unable to take oral antifungal agents. We investigated the effectiveness and safety of a novel long-pulsed 1,064-nm gallium arsenide (GaAs) laser surgical device for onychomycosis. METHODS: This 24-week single-center, single-blind, active-controlled exploratory clinical study comparatively evaluated the long-pulsed 1,064-nm GaAs laser (Healer1064) with the short-pulsed Nd:YAG laser surgical device in 20 participants randomly assigned to receive either test or control treatment at 4-week intervals during the 12-week treatment period. The rate of clinical improvement was evaluated by two independent dermatologist evaluators using the Onychomycosis Severity Index-score (OSI-score) and Turbidity Scale with standard photographs. Overall improvement and patient satisfaction were evaluated. Safety evaluation included pain intensity and adverse events. RESULTS: In 44 (test: 25; control: 19) cases in 19 participants who completed treatment, the clinical improvement rate in the test and control groups was 52.00% (13/52 cases) and 44.44% (9/19 cases), respectively, with significantly lower pain scores in the test than the control group for every treatment visit (P < 0.05) and without severe adverse events. CONCLUSIONS: The novel long-pulsed 1,064-nm GaAs laser showed greater, albeit nonsignificant, clinical improvement and was associated with less pain during treatment. Thus, the Healer1064 can provide satisfactory treatment outcomes through painless and effective improvement in onychomycosis symptoms.

Multiplex genotyping of SNPs in genomic DNA via hydrogel-based assay mediated with MutS and polyethylene glycol.

The simultaneous genotyping of multiple single nucleotide polymorphisms (SNPs) in genomic DNA derived from organisms holds significant potential for applications such as precision medicine and food product authentication. However, conventional assay technologies including qPCR-based techniques, microarrays, and hydrogel-based assays face limitations in efficient multiplexing of SNPs, particularly for large-size DNA beyond kilobase scales, due to constraints in multiplex capability, specificity, or sensitivity. In this study, a hydrogel-based multiplex SNP genotyping platform specifically designed for genomic DNA is presented. This platform integrates the ligation detection reaction (LDR) and rolling circle amplification (RCA) techniques within a hydrogel-based multiplex sensing system, enabling adaptable and sensitive SNP genotyping for genomic DNA. To enhance the specificity of the assay, MutS protein and polyethylene glycol are introduced into the protocol, reducing the non-specific ligation and RCA reactions synergistically. With significant specificity improvement of over 10-fold, three types of SNPs within an artificially constructed ∼1000 bp double-stranded DNA (dsDNA) are successfully genotyped with double-digit picomolar sensitivity. Furthermore, the practical applicability of the developed process for the origin identification of raw materials is demonstrated by genotyping three types of SNPs within genomic DNA obtained from two closely related plant species, Korean ginseng (Panax ginseng) and American ginseng (Panax quinquefolius), containing ca. 3.5 gigabase genome size. Of notable significance, this study marks the premiere achievement in PCR-free multiplex genotyping of SNPs in genomic DNA using a single fluorophore.

Sequential order dependent dark-exciton modulation in bi-layered TMD heterostructure.

We report the emergence of dark-excitons in transition-metal-dichalcogenide (TMD) heterostructures that strongly rely on the stacking sequence, i.e., momentum-dark K-Q exciton located exclusively at the top layer of the heterostructure. The feature stems from band renormalization and is distinct from those of typical neutral excitons or trions, regardless of materials, substrates, and even homogeneous bilayers, which is further confirmed by scanning tunneling spectroscopy. To understand the unusual stacking sequence, we introduce the excitonic Elliot formula by imposing strain exclusively on the top layer that could be a consequence of the stacking process. We further find that the intensity ratio of Q- to K-excitons in the same layer is inversely proportional to laser power, unlike for conventional K-K excitons. This can be a metric for engineering the intensity of dark K-Q excitons in TMD heterostructures, which could be useful for optical power switches in solar panels.

A Comparative Study of Titanium Cranioplasty for Extensive Calvarial Bone Defects: Three-Dimensionally Printed Titanium Implants Versus Premolded Titanium Mesh.

OBJECTIVE: This study compared the complications and symmetry outcomes between 3-dimensionally printed titanium implants and premolded titanium mesh in patients with extensive calvarial bone defects. METHODS: This retrospective analysis included patients with calvarial defects >50 cm2 undergoing cranioplasty who received either a 3-dimensionally printed titanium implant manufactured by selective laser melting techniques (N = 12) or a premolded titanium mesh customized onto a 3-dimensionally printed skull template (N = 23). Complications including intracranial infection, hardware extrusion, wound dehiscence, and cerebrospinal fluid leaks were investigated. Predictive factors affecting complications were investigated to identify the odds ratios in univariate and multivariate analyses. The symmetry was assessed by calculating the root mean square deviation, which showed the morphological deviation of the selected area compared with the mirrored image of the contralateral region. RESULTS: The overall complication rate was 26.1% (6/23 patients) in the premolded titanium group and 16.7% (2/12 patients) in the 3-dimensionally printed group. The reoperation rates did not differ significantly between the 2 groups (3-dimensionally printed group, 16.7%, versus premolded group, 21.7%). In multivariate analysis, only the number of previous cranial operation was significantly associated with the complication rate (odds ratio, 2.42; 95% confidence interval, 1.037-5.649; P = 0.041). The mean ± SD of the root mean square deviation was significantly smaller in the 3-dimensionally printed group (2.58 ± 0.93 versus 4.82 ± 1.31 mm, P < 0.001). CONCLUSIONS: The 3-dimensionally printed titanium implant manufactured by the selective laser melting technique showed comparable stability and improved symmetry outcomes compared with the conventional titanium mesh in the reconstruction of extensive calvarial defects.